ZY-DT216 HD Wireless Transmission System Wireless HDMI Extender Transmitter Receiver Video WIFI 100m Wireless HDMI TV Sender Kit
ZY-DT216,Navceker Wireless HD Video Solution enables wireless transmission of video/audio from any HDMI video source such as PC/HDTV to display devices includes HDTV/HD Monitor over the 5.8GHz band, with very low latency.
It does not require any special configuration of software driver installation-simply connect the transmitter to the HDMI output of the video source and the receiver to the HDMI input of the Panel/TV/Monitor. Its Plug & Play operation makes it the ultimate solution for the most demanding indoor/outdoor professional environments.
This Wireless HD Video Transmission Solution is widely applicable to family entertainments, office presentation, lecture, education, medical treatment, party, conference etc.
- Effective Range:330ft(100 meters no obstruction;164ft(50 meters) through the wall);
- Audio sampling rate: 32kHz, 44.1kHz and 48kHz ;
- Audio Format: DTS-HD/Dolby-true HD/LPCM7.1/DTS/DSD ;
- Video resolution: up to 1920*1080P@60Hz;
- Anti-interference frequency: 5.8 GHz;
- Radio Frequency power :13dbm;
- Male to male: Unicast,one TX to one RX applicataion;
- Male to female:Broadcast,one TX to 2 RX application;
- Wide band Infrared control:unidirectional 20~60 KHz IR romote control;
- Low latency:Less than 50 ms;
- Compressed mode:H.264 technology;
- No cable:between sender (TX) and receiver (RX);
- Video standard:compliance with HDMI 1.3 and HDCP 1.2 standard;
- High compatibility : match many kinds of display devices;
- Built-in automatic adjustment system: make the image smooth, clear and stable;
- Built-in ESD protection system：make transmission much safer. Perfect hdmi extension adapter for large homes, factories, construction sites, data control centers etc;plug and play
- Simple to install, plug and play
Transmission distance will be different due to the environment
Wall, brick or glass will shorten the signal cover range or cause big signal loss.
We simulated complex environment of different temperature, humidity and obstacles etc , obtain a series of real testing data, Average test result as follows:
1. Straight line distance without any obstacle, suggest 100m/330ft.
2. Straight line distance has wooden wall or glass wall, suggest 60m/200ft.
3. Straight line distance has reinforced concrete wall, suggest 30m/100ft.
Standards———-HDMI 1.3; HDCP 1.2
Maximum pixel clock——165MHz
Maximum data rate——-6.75Gbps
Compress Formats—–H.264 technology
Radio Frequency power ——-13dbm
Power supply—–The power adapter: DC 5V/2A
Power dissipation——MAX 6W
Temperature——-Operating: -5℃ ~ +70℃
Humidity——-Operating: 5% ~ 90%
The warranty——–1 year free warranty
Trouble shooting ：
1.Contact our customer service for installation guide.
2.Make sure power adapter is working fine by checking the power led in the front of the unit.
3.Audio Sync Issue: The sound should be from receiver. Do not directly connected to the source.
4.Power Issue: Please make sure the DC plug is secure in the units
5.Signal Issue: Our extenders use 5GHZ Channel. Please make sure your home WiFi is not on the same channels.
5. IR issue:1,Check if the IR emitter head is secured over the center of the IR window of source device. This position maybe discrepant if you use different sources, try to adjust the position if the signal is weak. 2,The control signal will be better when your controller is pointed at the IR receiver head directly.
- Wireless HDMI transmitter(WIFI atenna)——– 1 pcs
- Wireless HDMI receiver (WIFI atenna)———– 1 pcs
- The 3.5 mm standard audio line——————–1pcs
- Power adapter——————————————-2 pcs
- IR TX/RX terminal————————————–1 set
- User manual———————————————-1 pcs